Basement Systems of New York Before & After Photos

This homeowner recently purchased their new home. Because it was constructed with a poured concrete foundation and block walls, the walls began to bow. This led to the formation of stair-stepping cracks and the infiltration of both water and moisture. Because of the numerous projects that we have completed in the past, this homeowner decided to contact Basement Systems Of New York to see how we could help 

To take care of the issues at hand, we first had to install our temporary supports. After installing our temporary supports, we marked out and jackhammered our poured footings. Once done, we started to excavate. The excavation was done so that we could have access to knock down and rebuild the wall, as well as to waterproof their foundation. Finally, once done, we knocked down their old block foundation wall.

Once done, we turned our attention to creating a form for our new footing. Our footing would be made of concrete and rebar. Specifically numbers four and five. Once done, we were able to start rebuilding the block wall. After completing the erection of the wall, we applied both our patented waterproofing products to keep all moisture and water out. As well as a parge to it to give it that brand new foundation look.

Next, we installed six of our SmartJack foundation supports on top of the footings we had previously created, formed, and poured. These SmartJacks would bear the weight of our new 2x12' quadruple main girder. Before packing up and calling this project complete we roughly backfilled the area that we had excavated.

After completing this project for these homeowners, they noticed a tremendous difference in their home's structural integrity. More importantly than anything to these homeowners peace of mind had been restored. They can now sleep at night knowing that their home will never fall over. They could not be happier with how their project turned out and are glad that they invested in their home.   

Our client's concrete around their pool was suffering from multiple uneven surfaces. These uneven surfaces created a hazardous pool area for both kids and adults. Basement Systems of New York was called to level all the uneven surfaces that they had, we were able to restore the concrete around their pool with the help of PolyLevel. We injected PolyLevel foam beneath the concrete, which raised it back to the proper level and made it look brand new 

These homeowners contacted Basement Systems of New York because they noticed throughout the entirety of their home their floors sagged and had a bounce to them. This was due in part to condensation and moisture attacking their wood, this ultimately rotted out all their floor joists and main girder. 

To take care of the issue throughout the entire home we had to perform our work on three separate areas in their ginormous crawl space. These areas for our Installation Specialists were broken down into the room closest to the driveway, the middle room, and the room with the crawl space entrance. In doing this we made the project extremely decipherable to our foreman, as well allowed our team to tackle the most difficult areas first.

To take care of the issues in the room closest to the driveway we had to dig down several feet in order to establish our area to install our pre-cast footings. These pre-cast footings would eventually be the supports for our SmartJack support systems with steel i-beams. Once their new sports were installed we then began to sister all of their floor joists. After these steps were completed we then dug down in front of their damaged wall and formed a new stepped footing, which we pinned rebar into and then poured a new wall.

After completing this room we moved onto the middle room. Here we began establishing the areas for our pre-cast footings. We then proceeded to install our SmartJack support systems with steel i-beams. Once this was done we then sistered all of their floor joists. Finally, before finishing this area off we removed their old main girder and replaced it with a brand new quadruple 2x10 main girder. 

Finally, we worked on the area of their crawl space that contained the entrance. Here we installed four SmartJack support systems with steel i-beams, which ran from the entryway to the front of their new main girder. We then sistered twenty-three of their floor joists. 

Since implementing these systems the structural integrity of this home and its floors home have returned to the status they were in when the home was originally purchased over thirty years ago. 

This job was unique because the footing was above the floor so we needed to CleanSpace the walls so the water from the weepholes gets forced into our waterproofing system. This job  required a Flowguard system to turn this once wet basement dry. 

This job was unique because the footing was above the floor so we needed to install CleanSpace on the walls so the water from the weepholes would be forced into our waterproofing system. This job as well required a FlowGuard system to turn this once wet basement dry. Notice how their is no longer any water on the basement floor, and the walls also look nicer.