Click on a photo to enlarge.
When this homeowner reached out to us, they were facing significant settlement issues with their home. The root of the problem? Their foundation had been poured in separate sections, without proper reinforcement. This not only compromised the stability of their home but also led to water penetration issues and a musty smell seeping upstairs from an unfinished area.
We knew this project would require a comprehensive solution, so we got to work. First, we removed the old, deteriorating supports and replaced them with our state-of-the-art SmartJacks. These galvanized steel supports are designed to resist moisture and provide long-lasting stability.
Next, we dug down the dirt floor to install our WaterGuard new slab system, addressing the water infiltration issue. But we didn’t stop there. Knowing the foundation’s weak points, we excavated around the exterior to install pre-construction Stabil-Loc push piers. These piers were tied into number 8 rebar and connected to the foundation, providing the much-needed strength the original construction lacked.
With everything in place, we formed around the piers and rebar, both inside and outside, and poured concrete to create a strong, unified bond. Finally, we ground down the walls and applied SRS carbon fiber strips, ensuring the walls would remain stable and secure for years to come.
The transformation was remarkable. The homeowner was thrilled with the outcome, grateful that they addressed the issue before it became an even bigger headache. Thanks to our work, their home now boasts restored structural integrity and, most importantly, peace of mind.
We received a phone call from a concerned home owner looking to resolve an issue with what he called "A Nightmare Crawlspace". He expressed being concerned about the energy efficiency and unhealthy environment of his home. After a free evaluation our certified professionals replaced all his moldy fiberglass with spray foam insulation and sealed his crawlspace with our 25 year warrantied CleanSpace crawlspace liner.
The home owner is very pleased and now has a storage area instead of a nightmare.
Just as we are always improving the lives of our clients and bringing peace of mind to them we are always improving our shop. Our team needed a dedicated area to keep materials, supplies, and miscellaneous tools/vehicles. Because of this need, we decided the best thing to do was to pour a new concrete slab that would be dedicated to these items. We now have one area where all our items can be stored, instead of them being stored in multiple locations throughout the shop.
This homeowner contacted Basement System of New York because they had a local contractor sister their floor joists, as well as shimmed their support beams. In theory, everything should have been level, unfortunately to their dismay, their floors still continued to sag and sink in several areas.
To take care of the issues at hand, we first started by removing the old fiberglass insulation from their floor joist for our new support systems. Once this was completed we installed twenty-four feet of four-inch I-beams on each side of their old main girder for supplemental floor support, along with five of our SmartJack support systems with pre-cast footings. We then replace their old main girder with a new triple two by ten girder with five SmartJack support systems with pre-cast footings. Finally, before encapsulating the crawl space in our drain mat with CleanSpace and applying three inches of Closed-Cell spray foam on walls and box beam we lifted, leveled, and fully supported the home.
In performing this project, we were able to make this home structurally sound and comfortable home again. More importantly than anything, we were able to restore peace of mind to the homeowners. They could not be happier with the result of their project and how much more comfortable their home now feels thanks to the work that we completed.